8 Trendy Material Picks for Your Custom Cabinet Door
8 Trendy Material Picks for Your Custom Cabinet Door
Many people are very entangled when choosing cabinets, so many cabinet doors are completely confusing. Here, we has collected several door panel materials for you, so that you can easily choose without entanglement.
The base material of the baking varnish door panel is medium density fiberboard, and the surface is baked by spraying and baking at high temperature six times. The surface brightness and strength of ordinary paint are not as good as piano paint, and piano paint is not as good as tempered paint.
Advantages: The baking varnish board is bright and bright, easy to shape, very beautiful and fashionable, excellent waterproof performance, strong anti-fouling ability, and easy to clean. Because it is computerized paint, there is no limit to the choice of colors, that is, you can choose any one or more colors you see as the color of your door panel.
Disadvantages: Careful protection when using, easy to bump and scratch. Kitchens with a lot of oily smoke are prone to chromatic aberration.
The base material of the fire door board is particle board, moisture-proof board or density board, and the surface is decorated with fire board. The construction of fireproof boards has relatively high requirements for pasting glue, and the price of good-quality fireproof boards is more expensive than decorative boards.
Advantages: fireproof door panels are bright in color, various edge sealing forms, wear-resistant, scratch-resistant, high-temperature resistant, seepage-proof, easy to clean, moisture-proof, non-fading, and the price is relatively affordable.
Disadvantages: The fire door panel is a flat plate, which cannot produce three-dimensional effects such as bumps and metals, and the fashion sense is slightly poor.
Solid wood cabinets are mainly divided into pure solid wood, solid wood composite, and solid wood veneer. Among them, pure solid wood is the best material and the price is the highest; solid wood composite cabinets mainly refer to solid wood splicing materials as the base material, and the surface is pasted with solid wood veneers, and the overall effect is the same as solid wood. Solid wood cabinets; solid wood veneer cabinets are double veneered.
Advantages: Solid wood cabinets have good stability, natural and generous texture, no cracking, and no deformation.
Disadvantages: high price, cheap, inferior solid wood cabinets have low waterproof performance and low corrosion resistance.
Melamine board is also called ecological board, double veneer board and paint-free board. Papers of different colors or textures are soaked in melamine resin adhesive, dried to a certain degree of curing, and then laid on the surface of particleboard, medium density fiberboard or cardboard, and made by hot pressing.
Advantages: very high hardness, wear resistance, heat resistance, corrosion resistance; very smooth surface, various colors, can meet various appearance requirements.
Disadvantages: Be sure to pay attention to the quality of the genuine product! The raw material price of melamine is affordable, but if the workmanship is not good, the edges are easy to collapse, and many unscrupulous manufacturers fail to meet the qualified standards, which will easily cause air pollution in the home and affect human health.
5.Blister Door Panel
The base material of the blister board is a density board, and the surface is vacuum-absorbed, or a seamless pvc film compression molding process is adopted.
Advantages: The seamless pvc film compression molding process does not require edge sealing, and there is no problem of glue opening. This sheet will not crack or warp and is scratch, stain and fade resistant. The color is rich, the wood grain is realistic, and the monochromatic chroma is pure and bright.
Disadvantages: Due to the appearance of PVC film, the high temperature resistance is poor, and the contact with cigarette butts will easily cause damage to the PVC film.Blister door panel
The base material of the blister board is a density board, and the surface is vacuum-absorbed, or a seamless pvc film compression molding process is adopted.
Small workshop manufacturers use plexiglass, and standard manufacturers use acrylic. Environmental protection, three-dimensional shape. Kitchen doors enrich the cabinet design and play a positive role. Favored by some, this type of door panel is more popular in Europe.
Advantages: Vibrant colors, smooth, easy to clean.
Disadvantages: The surface layer is easy to fall off, which affects the appearance, the surface is easy to be scratched, it will oxidize and change color in the air at room temperature, and the gloss retention time is short.
Its structure is a metal plate or imitation metal plate, which is specially oxidized on the medium density plate, finely brushed and polished, and a dense protective layer is formed on the surface. The process is similar to that of the West German plate. The difference is that the West German plate needs to be processed twice. The metal texture door is processed directly at one time. Among them, the convex and concave panels of aluminum veneer are currently the most high-end door panels. It is the best and most high-grade one on the molding board at present.
Advantages: Excellent wear resistance, high temperature resistance, corrosion resistance, and simple daily maintenance.
Disadvantages: expensive, the shape feels a bit cold, and it is easy to leave groove-like pits after hitting the ball.
Porcelain door panels are high-grade materials that are currently treated with baking varnish in kitchen cabinet door panels. The surface is as smooth as glass, the reflector is as clear as a mirror, it is resistant to discoloration, no aging, the surface is permanent as new, the surface hardness is strong, no cracks on the corners, no paint falling off normal collision, not easy to scratch, no leakage on the surface, excellent waterproof performance, environmental protection The function reaches the national E1 level.
